Copper Roofing
Traditional Excellence
Our tradesmen have been trained in traditional installation methods, and work to the highest standards to achieve a roof that is as visually appealing as it is watertight. Both copper and lead can be used to provide a solution to any feature that would be difficult using slates. For example, towers, domes and spires often use lead or copper, and are able to withstand the rigors of the weather in their exposed positions. Custom folded metal roofing can last for 100 years or longer, with the added benefit of little or no maintenance.
Although the cost of copper roofs may be slightly higher initially, it's long lasting and low-maintenance characteristics mean it can be less expensive over it's lifetime than the so called "inexpensive roofing materials".
Installation
Whether a complex roof like the one shown above, or a simple flat roof, the method of construction is essentially the same. The initial substrate would be tongue & groove or 18mm plywood, covered by a liner material to reduce friction between the copper and the wood. Batons are then securely fixed to the deck, forming the bays which are a characteristic feature of these roofs. The copper bays are formed to the exact specifications of your roof, and fixed into the prepared bays. Copings and trims are welted on to provide a watertight seal at all the joins.
Careful consideration is paid to the design of each copper roof, particularly where complex three-dimensional corners found at chimneys, gullies and valleys, must maintain junction integrity. The complex junction pieces must be carefully patterned and folded tight to ensure a complete seal.
Over the years we have been providing solutions, we have developed custom solutions for nearly every type of situation, as well as the ability to resolve any unique challenge.